In the complex world of commercial construction, you need a partner with the products and expertise to ensure that your project meets the highest quality you can offer. Crossroads C&I commercial insulation products protect property, extend building life cycles, and enhance occupant comfort. Plus, they’re designed to make construction faster and easier. Crossroads C&I is also recognized and trusted by top architects and contractors across Western Canada who specify and use our products for energy efficiency, safety, sustainability, fire protection, water resistance, and sound control.
Through our partnerships with the leading manufacturers of these products, Crossroads C&I supplies the most extensive range of commercial insulation materials in Canada, and they come in a large variety of forms which fall into one of the following categories:
Fiber Glass/Glass Wool
Fiber glass commercial insulation distributed by Crossroads C&I offers trusted performance and proven energy savings. Whether you’re building a new structure or retrofitting an existing building, each of our insulation products is designed, tested and proven to provide maximum thermal and acoustical performance for the life of a building.
Fiber glass pipe and equipment insulation supplied by Crossroads C&I is suitable for installation over hot, cold, concealed and exposed piping systems with operating temperatures up to 850°F (454°C). Consistent product performance means dependable insulation values, superior strength and easy installation. Available in a range of sizes this product can be used for thermal and acoustic applications.
Micro-Lok® HP
|
|
|
Crossroads C&I distributes Micro-Lok® HP Fiber Glass Pipe Insulation which is a high performance insulation made from rotary glass fibers bonded with a thermosetting resin and produced in 36" (0.92 m) lengths. Micro-Lok HP is used to insulate standard iron pipe and copper tubing. The 3-foot (0.92 m) sections are available plain or with a factory applied vapor-barrier jacket. The all-service (ASJ) vapour retarder jacket includes a longitudinal, self-sealing closure lap. The jacket system is adhered to each fiber glass section using a specially formulated adhesive to ensure jacket securement. A latex paint may be applied to the Micro-Lok HP jacket after installation.
The factory-installed tape system permits installation at ambient temperatures down to 20°F (-7°C), and will not soften or separate when exposed to high ambient temperatures and humidity.
|
Micro-Flex®
|
|
|
Crossroads C&I distributes Micro-Flex® Large Diameter Pipe and Tank Wrap which is a 2.5 pcf (40.1 kg/m3) density product made from high temperature, semi-rigid fiber glass blanket bonded to a flexible facing. Shipped in roll form, the unique fiber orientation gives Micro-Flex increased compressive strength, and permits close installation on round surfaces without reducing the thickness of insulation resulting in a loss of insulating efficiency. Both AP and FSK facings are intended for indoor use, and AP facing may be painted with a latex paint after installation. The ease of fit is particularly helpful on retro-fit installations where existing insulation may result in non-standard outside diameters. |
800 Series Spin-Glas®
|
|
|
Crossroads C&I distributes 800 Series Spin-Glas duct and equipment insulation which is manufactured from inorganic glass fibers bonded together with thermosetting resin. 800 Series Spin-Glas is available plain or faced in a variety of densities for use on systems which operate up to 450°F (232°C). For faced products, surface temperature should not exceed 150°F (66°C). AP or FSK vapor retarder faced material meets the requirements of NFPA 90A and 90B. Types 813, 814, 815 and 817 provide neat, square corners for an excellent finished appearance on duct and equipment systems. Spin-Glas can be readily cut with an ordinary knife and secured utilizing mechanical fasteners and/or adhesives. |
External Duct Insulations
|
|
|
For lining and insulating sheet metal ducts in HVAC systems, Crossroads C&I Duct insulation, in a variety of shapes, provide both high operational performance and better indoor air quality for building occupants. |
Back to Top
PVC Jacketing
PVC Jacketing, distributed by Crossroads C&I, provides a protective covering for insulated or bare pipes. Jacketing is available in many forms from rolls, cut to size pieces (cut and roll) to many different configurations as fitting covers. PVC jacketing and fittings are quick and easy to install reducing labour costs. They also offer a clean and aesthetic look in exposed commercial, industrial and institutional applications. A full complement of compatible accessories is available to ensure a very high performance of your system. PVC fitting covers and jacketing are ideally suited for indoor or outdoor use on chilled water, hot water, steam and other piping systems in commercial, institutional, and industrial applications.
|
|
Advantages:
- Exceptional Durability
- Corrosion Resistant
- Ease of Maintenance
- Easy to Install
|
Back to Top
Extruded Polystyrene Foam
For your cold temperature work, Crossroads C&I fabricates and distributes XPS Extruded Polystyrene Foam.
|
|
The main component of this high-performance insulation system is extruded polystyrene, a rigid, thermoplastic foam produced in a continuous extrusion process. Extruded polystyrene is effective for insulating low-temperature systems as cold as -297°F (-183°C). The foam’s closed-cell, uniform structure, along with the naturally water-repellent nature of the polystyrene resin, provide moisture resistance. This characteristic allows the insulation to maintain its performance over time in moist environments like those in which ammonia refrigeration systems typically are used. The foam is odorless, non-fibrous, non-dusting and non-irritating. Using extruded polystyrene in an ammonia refrigeration system provides a number of benefits such as good thermal conductivity, water resistance and condensation control. |
Back to Top
Elastomeric Insulation
Commonly used in mechanical applications, Crossroads C&I can meet your Elastomeric Insulation requirements. Please note the elastomeric sheets can be custom fabricated into various shapes. For example custom gaskets can be created for your heating and cooling systems.
K-Flex® LS
|
|
|
K-Flex® LS pipe insulation is designed for the professional contractor and is an ideal choice for condensation control on piping, vessels, ducts or equipment in commercial and industrial applications.
K-Flex® LS tubes are offered in slit and unslit versions in 6 foot and 3 foot lengths for safe handling and easy installation. Slit tubes and sheets are available with PSA (pressure sensitive adhesive) for easy and efficient installation. The PSA offering assures a tight bond without the use of contact adhesives.
|
Nomaco’s therma-cel® Pipe Insulation
|
|
|
Nomaco’s therma-cel® Pipe Insulation is a flexible, polyolefin, thermal insulation. It is used to retard heat gain and prevent condensation or frost formation on cold water plumbing, chilled water and air-conditioning lines. therma-cel Pipe Insulation also retards heat loss on heat water plumbing. therma-cel® Seam-Seal has a low thermal conductivity and very low water vapor transmission rate. This low density product demonstrates excellent thermal, physical and chemical resistant properties and has a broad service temperature range between -330°F and 210°F (-201°C and 99°C). It can be installed in commercial, industrial and residential insulation projects. Acceptable for use with heat tracing/heat tape. |
Back to Top
Polyisocyanurate
Crossroads C&I fabricates and distributes TRYMER® 2000 XP Polyisocyanurate Insulation
|
|
TRYMER® 2000 XP polyisocyanurate pipe insulation is a polyurethane modified polyisocyanurate cellular plastic supplied in the form of bunstock. It can be fabricated into sheets, pipe shells and other shapes for a variety of thermal insulation applications.
TRYMER 2000 XP insulation is suitable for applications that require a Flame Spread Index of 25 or less and a Smoke Developed Index of 450 or less when tested as per ASTM E84. These are typical requirements for pipe insulation located in non-plenum locations so Trymer 2000 XP Insulation is particularly ideal for use as pipe insulation in the non-plenum areas of commercial buildings.
|
Back to Top
Commercial Accessories
Crossroads C&I offers a complete line of products to accompany our commercial insulation. We strive to be your single shopping source for all insulation accessories including:
|
 |
- Adhesives, Mastics and Duct Sealants
- Weld pins, Fasteners, Anchors
- Insulation Tapes
- Caulking
- Insulation Tools
|
Back to Top
CrossRock PG
CrossRock PG is a semi-rigid mineral wool insulation board that is non-combustible, water repellent, fire resistant, sound absorbent and
features low thermal conductivity. This product is fabricated with a white polypropylene PSP facing (WMP 50) on one surface. CrossRock PG is designed specifically for parking garage under decking applications.
Back to Top